wiki:III130615/Lab12

◢ <實作十一> | <回課程大綱> ▲ | ◣

實作十二 Lab 12

HBase 行為觀察
HBase in Practice
以下練習,請使用 hadoop4win 環境執行。
  • 首先請先下 start-hbase 指令或點選"開始"->"stat-hbase",來開啟 HBase 與 Hadoop 的 Daemon
  • 請回到家目錄,並輸入指令『hbase shell hbase-test』。
  • 註一:這個 hbase-test 存放在安裝帳號身分的家目錄中,倘若用其他帳號登入,可能會找不到。
  • 註二:如果剛剛有下 stop-hadoop 的話,一定要記得 start-hadoop,因為 HBase 的資料表格是存在 HDFS 之上。
    $ cd ~
    $ hbase shell hbase-test
    

  • STEP 11: 您也可以輸入指令『hbase shell』進入互動式的 HBase 指令列。您可以嘗試用底下列舉的指令,重現 hbase-test 的過程。
    $ hbase shell
    
    create 'test','data'
    put 'test','row1','data:1','v1'
    put 'test','row2','data:2','v2'
    put 'test','row3','data:3','v3'
    scan 'test'
    disable 'test'
    drop 'test'
    list
    exit
    

  • 欲離開 Cygwin 環境前或者要暫時關閉 HBase 系統時,請輸入指令『stop-hbase』。需提醒您的是 HBase 因採用 ZooKeeper,有時關閉 master 的速度會比較慢,請耐心等候。註:目前下 exit 指令登出時會執行 stop-hbase 與 stop-hadoop 的動作。
    $ stop-hbase
    

  • 倘若是已經關閉 Cygwin 視窗,第二次重新執行 C:\hadoop4win\Cygwin.bat,請輸入指令『start-hbase』,目前 start-hbase 會視目前 java process 判斷 hadoop 是否存在而執行『start-hadoop』。
    $ start-hbase
    

Hbase 使用方法
HBase 0.20 + Hadoop 0.20

列出所有 table

hbase(main):>	list

新增 table

A . 直接增加一個表 t2

hbase(main):>	create 't2'

B . 增加一個擁有 'f1','f2','fn' 為 column family 的表: t1

hbase(main):>	create 't1','f1','f2','fn'   

查詢 Table 欄位

hbase(main):> describe 't1'

執行結果參考

hbase(main):> describe 't1'
DESCRIPTION                                                             ENABLED                               
 {NAME => 't1', FAMILIES => [{NAME => 'f1', COMPRESSION => 'NONE', VERS true                                  
 IONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY => '                                       
 false', BLOCKCACHE => 'true'}, {NAME => 'f2', COMPRESSION => 'NONE', V                                       
 ERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY =                                       
 > 'false', BLOCKCACHE => 'true'}, {NAME => 'fn', COMPRESSION => 'NONE'                                       
 , VERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMOR                                       
 Y => 'false', BLOCKCACHE => 'true'}]} 

加入cell-value

需先擁有表 t1 與column-family : f1 並且加入一個 column-quantifier c1

hbase(main):>	put 't1', 'r1', 'f1', 'v1'    
hbase(main):>	put 't1', 'r1', 'f1:c1', 'v2'    
hbase(main):>	put 't1', 'r2', 'f2', 'v3'
hbase(main):>	put 't1', 'r2', 'f2:c2', 'v4'
Table: 't1'
row-key'f1''f2''fn'column-family
*'c1'*'c2'*column-quantifier
r1v1
v2
r2v3
v4

列出cell-value

A . 列出一列(row)

hbase(main):>	get 't1', 'r1'

執行結果參考

COLUMN                    CELL                
 f1:                         timestamp=1285737082689, value=v1                                                
 f1:c1                       timestamp=1285737085874, value=v2                                          
Table: 't1'
row-key'f1''f2''fn'column-family
*'c1'*'c2'*column-quantifier
r1v1
v2
r2v3
v4

B . 列出一個 cell 的值

hbase(main):>   get 't1', 'r1', {COLUMN => 'f1:c1'}

執行結果參考

COLUMN                       CELL                             
 f1:c1                       timestamp=1285737085874, value=v2
Table: 't1'
row-key'f1''f2''fn'column-family
*'c1'*'c2'*column-quantifier
r1v1
v2
r2v3
v4

刪除 cell-value

hbase(main):>	deleteall 't1','r1'

執行結果:會把 row-key 是 'r1' 的所有紀錄。此時資料表 't1' 會變成如下表所示。

hbase(main):> scan 't1'                 
ROW    COLUMN+CELL                                                                      
 r2    column=f2:, timestamp=1285737091644, value=v3                                    
 r2    column=f2:c2, timestamp=1285737094157, value=v4
Table: 't1'
row-key'f1''f2''fn'column-family
*'c1'*'c2'*column-quantifier
 
r2v3
v4

加入column family

hbase(main):>	disable 't1'
hbase(main):>   alter 't1', {NAME => 'f3'}
hbase(main):>   enable 't1'

執行結果:多了一個 column-family 'f3' 可以用 describe 指令查詢,結果示意如下表:

hbase(main):021:0> describe 't1'
DESCRIPTION                                                             ENABLED                               
 {NAME => 't1', FAMILIES => [{NAME => 'f1', COMPRESSION => 'NONE', VERS true                                  
 IONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY => '                                       
 false', BLOCKCACHE => 'true'}, {NAME => 'f2', COMPRESSION => 'NONE', V                                       
 ERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY =                                       
 > 'false', BLOCKCACHE => 'true'}, {NAME => 'f3', VERSIONS => '3', COMP                                       
 RESSION => 'NONE', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMOR                                       
 Y => 'false', BLOCKCACHE => 'true'}, {NAME => 'fn', COMPRESSION => 'NO                                       
 NE', VERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_ME                                       
 MORY => 'false', BLOCKCACHE => 'true'}]}
Table: 't1'
row-key'f1''f2''f3''fn'column-family
*'c1'*'c2'**column-quantifier
r2v3
v4

刪除column family

hbase(main):>	disable 't1'
hbase(main):>	alter 't1', {NAME => 'f1', METHOD => 'delete'}
hbase(main):>   enable 't1'

執行結果:會移除 column family 為 'f1' 的所有欄位,可用 describe 指令確認,結果如下表所示。

hbase(main):053:0> describe 't1'
DESCRIPTION                                                             ENABLED                               
 {NAME => 't1', FAMILIES => [{NAME => 'f2', COMPRESSION => 'NONE', VERS true                                  
 IONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY => '                                       
 false', BLOCKCACHE => 'true'}, {NAME => 'f3', COMPRESSION => 'NONE', V                                       
 ERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMORY =                                       
 > 'false', BLOCKCACHE => 'true'}, {NAME => 'fn', COMPRESSION => 'NONE'                                       
 , VERSIONS => '3', TTL => '2147483647', BLOCKSIZE => '65536', IN_MEMOR                                       
 Y => 'false', BLOCKCACHE => 'true'}]}                                                                        
1 row(s) in 0.0200 seconds
Table: 't1'
row-key 'f2''f3''fn'column-family
*'c2'**column-quantifier
r2v3
v4

節點狀態

hbase(main):>	status

刪除整張table

hbase(main):>	truncate 't1'
  • 執行完 truncate 後,所有 't1' 的內容都會被移除。但此時,下 list 還會有 't1' 這個表格存在。
hbase(main):>	disable 't1'
hbase(main):>	drop 't1'
  • 要完整移除 't1' 資料表,必須使用 disable 先將 't1' 停用,再用 drop 指令把 't1' 完全刪除。
Last modified 11 years ago Last modified on Jun 12, 2013, 5:28:15 PM