| | 1 | [[PageOutline]] |
| | 2 | = Using GlusterFS in DRBL Environment = |
| | 3 | == 0.Introduction == |
| | 4 | |
| | 5 | [[BR]] |
| | 6 | == 1.Installation == |
| | 7 | * [http://www.gluster.org/docs/index.php/Install_GlusterFS_from_Source Installation Manual] |
| | 8 | * Install Requirements Packages |
| | 9 | {{{ |
| | 10 | $ aptitude install autotools libtool gcc flex bison byacc linux-headers-`uname -r` |
| | 11 | }}} |
| | 12 | * Install GlusterFS patched FUSE Module [http://ftp.zresearch.com/pub/gluster/glusterfs/fuse/ GlusterFS patched FUSE] |
| | 13 | {{{ |
| | 14 | $ wget http://ftp.zresearch.com/pub/gluster/glusterfs/fuse/fuse-2.7.3glfs10.tar.gz |
| | 15 | $ tar -zxvf fuse-2.7.3glfs10.tar.gz |
| | 16 | $ cd fuse-2.7.3glfs10 |
| | 17 | $ ./configure --prefix=/usr --enable-kernel-module |
| | 18 | $ make install |
| | 19 | $ ldconfig |
| | 20 | $ depmod -a |
| | 21 | $ rmmod fuse |
| | 22 | $ modprobe fuse |
| | 23 | $ vim /etc/modules |
| | 24 | fuse |
| | 25 | }}} |
| | 26 | * Install GlusterFS [http://ftp.zresearch.com/pub/gluster/glusterfs/1.3/ GlusterFS 1.3] |
| | 27 | {{{ |
| | 28 | $ wget http://ftp.zresearch.com/pub/gluster/glusterfs/1.3/glusterfs-1.3.11.tar.gz |
| | 29 | $ tar -xzf glusterfs-1.3.11.tar.gz |
| | 30 | $ cd glusterfs-1.3.11 |
| | 31 | $ ./configure --prefix= |
| | 32 | $ make install |
| | 33 | }}} |
| | 34 | |
| | 35 | [[BR]] |
| | 36 | == 2.FS design == |
| | 37 | |
| | 38 | [[BR]] |
| | 39 | == 3.Test == |
| | 40 | |
| | 41 | [[BR]] |
| | 42 | == 4.Refernece == |
| | 43 | [http://www.gluster.org/docs/index.php/GlusterFS GlusterFS] |
