Changes between Version 1 and Version 2 of chwhs/Grid_environment/GT_DRBL

Timestamp:

Sep 11, 2008, 4:05:08 PM (17 years ago)

Author:

chwhs

Comment:

--

chwhs/Grid_environment/GT_DRBL

@@ -59 +59 @@
  /etc/xinetd.d/globus-gatekeeper
 }}}
+  * part_b) DRBL:[[BR]][[BR]]
+   * After you install DRBL server, you can follow the example when you execute "drblpush -i" to set up the client environments. Each machine need a host certificate for Globus, and its hostname needs to be fixed. In order to avoid modifying some congifuration files(ex:/etc/hosts) erery time and avoid starting Globus unsuccessfully, you need to let the DHCP service in DRBL server offer same IP address to the client every time when client boots.[[BR]][[BR]] 
+{{{
+root@drbl-srv:/opt/drbl# /opt/drbl/sbin/drblpush -i -l 0
+
+******************************************************
+Now we can collect the MAC address of clients!
+If you want to let the DHCP service in DRBL server offer same IP
+address to client every time when client boot, and you never did this
+procedure, you should do it now!
+If you already have those MAC addresses of clients, you can put them
+into different group files (These files number is the same number of
+networks cards for DRBL service). In this case, you can skip this
+step.
+This step helps you to record the MAC addresses of clients, then
+divide them into different groups. It will save your time and reduce
+the typos.
+The MAC addresses will be recorded turn by turn according to the boot
+of clients,
+and they will be put into different files according to the network
+card in server, file name will be like macadr-eth1.txt,
+macadr-eth2.txt... You can find them in directory /etc/drbl.
+Please boot the clients by order, make sure they boot from etherboot or PXE!
+Do you want to collect them ?
+[y/N] y
+******************************************************
+OK! Let's do it!
+request_eth_port:eth1
+Stopping dhcp3-server ...
+Stopping DHCP server: dhcpd3.
+Stopping tftpd-hpa ...
+Stopping HPA's tftpd: in.tftpd.
+*****************************************************.
+Start detecting MAC address....
+Enter 1 or press Enter to view the collecting status.
+Enter 2 or q to finish collecting and quit.
+1
+=======================================
+00:0C:29:FA:20:5A
+00:0C:29:EB:9E:2F
+00:0C:29:1B:19:1E
+Total: 3
+=======================================
+Enter 1 or press Enter to view the collecting status.
+Enter 2 or q to finish collecting and quit.
+2
+*****************************************************.
+The collected MAC addresses from [eth1] are saved in file(s)
+separately: macadr-eth1.txt.
+These files are saved in directory /etc/drbl.
+******************************************************
+OK! Let's continue...
+******************************************************
+Do you want to let the DHCP service in DRBL server offer same IP
+address to the client every time when client boots (If you want this
+function, you have to collect the MAC addresses of clients, and save
+them in file(s) (as in the previous procedure)). This is for the
+clients connected to DRBL server's ethernet network interface eth1 ?
+[y/N] y
+******************************************************
+OK! Please tell me the file name which contains the MAC address of
+clients line by line for eth1.
+[macadr-eth1.txt]
+******************************************************
+What is the initial number do you want to use in the last set of
+digits in the IP (i.e. the initial value of d in the IP address
+a.b.c.d) for DRBL clients connected to this ethernet port eth1.
+[1] 10
+******************************************************
+The file name you set is "macadr-eth1.txt".
+The clients number in this file is 3.
+We will set the IP address for the clients connected to DRBL server's
+ethernet network interface eth1 By the MAC address file you set, the
+IP addresses for the clients connected to DRBL server's ethernet
+network interface eth1 as: 192.168.0.10 - 192.168.0.12
+Accept ? [Y/n] y
+******************************************************
+OK! Let's continue...
+******************************************************
+The Layout for your DRBL environment:
+******************************************************
+         NIC    NIC IP                    Clients
++-----------------------------+
+|         DRBL SERVER         |
+|                             |
+|    +-- [eth0] 192.168.183.129 +- to WAN
+|                             |
+|    +-- [eth1] 192.168.0.254 +- to clients group 1 [ 3 clients, their IP
+|                             |            from 192.168.0.10 - 192.168.0.12]
++-----------------------------+
+******************************************************
+Total clients: 3
+******************************************************
+Press Enter to continue...
+}}}
+   * You need to modify two files: "/opt/drbl/sbin/drbl-nfs-exports" and "/opt/drbl/sbin/drbl-gen-client-files".[[BR]][[BR]]
+     * (1) /opt/drbl/sbin/drbl-nfs-exports
+{{{
+ In "for subnet in $subnet_list" loop, you should add one line.
+
+    /usr/local/globus-4.2.0 $subnet.*($EXPORTS_NFS_RO_NRS_OPT) 
+
+ In "for ip in `get-client-ip-list`" loop, you should also add one line.
+
+    /usr/local/globus-4.2.0 $ip($EXPORTS_NFS_RO_NRS_OPT)
+
+ We assume that $GLOBUS_LOCATION is /usr/local/globus-4.2.0.
+}}}
+     * (2) /opt/drbl/sbin/drbl-gen-client-files
+{{{
+ You only need to add one line.
+
+    $nfsserver:/usr/local/globus-4.2.0   /usr/local/globus-4.2.0   nfs    $FSTAB_NFS_RO_OPT
+}}}
+